Azden IRR-30PKG5 Dual Channel Infrared Package

 
Azden IRR-30PKG5 Dual Channel Infrared Package
 
RRP: $1460.00
SAVE: $65.00
PAY: $1395.00   INC GST
Quantity
Get shipping quote
SKU: MICAZD129
Bookmark and Share
Guaranteed Australian
sourced and warrantied

IRR-30PKG5 - General Description

The Azden IRR-30PKG5 is a dual channel standard infrared package with a IRR-30P dual receiver, a IRH-15C hand held microphone, a IRN-10 pendant transmitter and a IRD-60 external sensor.

Infrared wireless microphone systems are the best solution for classrooms. In today's RF saturated world a regular (VHF or UHF) microphone system risks interference from variety of other devices and sources. Cell phones, radios, TV, PA systems, police and emergency service systems can all interfere with VHF and UHF, but not with IR.

Furthermore, infrared is perfect for classroom audio, since, unlike the other systems, IR is short-range, cannot penetrate walls, and is line-of-sight. This means that a school can have as many classrooms as desired with individual audio systems, without fear of interference. Since the Azden system is dual-channel, the teacher can have one microphone and a second person can also have a microphone. In addition, since each class-room system is on the same pair of channels, teachers can go from room to room with-out having to switch microphones.

IRR-30PKG5 - Specifications

IRR-30P Specifications
Sub-carrier frequencies: 2.00MHz - 3.00MHz
Type: Super heterodyne – crystal controlled
Modulation: FM
Signal-to-Noise: 75dB A weighted
Reception sensitivity: 25dBµV
Line Input impedance: 32k ohms ±15
Line Output adjustment: infinity to +10dBu
Audio Output: 2 x Microphones (6.5mm Jack)
5W x 4 at 4 ohms
Power requirement: 15V DC at 2.7A (use model BC-30

IRH-15C Specifications
Sub-carrier frequencies: 2.06MHz & 2.56MHz switchable
Modulation: FM
Microphone element type: Uni-directional dynamic
Frequency Response: 50-8kHz ±3dB
Battery type: 2-“AA” alkaline( 1.5V x 2 ) or
2-1HR-3U “AA” rechargeable Ni-MH (1.2V x 2
Battery life: 6 hours w/alkaline batteries

IRN-10 Specifications
Sub-carrier frequencies: 2.06MHz & 2.56MHz switchable
Modulation: FM
Microphone element type: Uni-directional electret x 2
Frequency response: 50-9kHz ±3dB
Ext Mic input impedance: 2.2k ohms Ext Mic input jack: 3.5mm
Ext. Mic Voltage/Current: 3.5VDC at 1mA (to power electret mic element
Mic gain adjustment: 6dB to approx. –10dB
Battery type: 2-"AA" Alkaline (1.5V x 2) or
2-1HR-3U "AA" rechargeable Ni-MH (1.2V x 2
Battery life: 8hours w/alkaline batteries

IRD-60 Specifications
Output: F Connector
Power: powered by receiver (24V at 15mA
Cable requirement: RG59 - 75 ohm coaxial

IRR-30PKG5 - Contents

  • 1 x IRR-30P Receiver
  • 1 x IRH-15c Hand held microphone
  • 1 x IRN-10 chest worn microphone
  • 1 x IRD-60 External sensor (including ceiling bracket)
  • 1 x 5m Cable with F-Type Connector
  • 1 x Power supply 15V DC at 2.7A