Kramer TP-582T 2x1 HDMI Plus Bidirectional RS-232, Ethernet & IR over Twisted Pair Switcher/Transmitter

TP-582T - General Description

The TP-582T is a high-quality twisted pair transmitter for HDMI, Ethernet 100BaseT, bidirectional RS-232 and IR signals. The TP-582T selects one of two HDMI inputs, and converts it with the Ethernet 100BaseT, RS-232 and IR input signals to a twisted pair signal. The TP-582R converts the twisted pair signal back to Ethernet 100BaseT, RS-232, IR and two HDMI outputs, and de-embeds the audio to S/PDIF and TOSLINK® audio outputs.

TP-582T - Features

• Max. Data Rate - 2.25Gbps.
• HDTV Compatible.
• HDCP Compliance.
• HDMI Support - HDMI (V.1.4 with Deep Color, x.v.Color™, Lip Sync, HDMI Uncompressed Audio Channels, Dolby TrueHD, DTS-HD, CEC).
• 3D Pass-Through.
• EDID PassThru - Passes EDID/HDCP signals from source to display.
• Bidirectional RS-232 Interface - Commands and data can flow in both directions via the RS-232 interface, allowing status requests and control of the destination unit.
• Ethernet Interface - Passes 100BaseT.
• System Range - Up to 100m (330ft).
• Cable - Requires shielded twisted pair (STP) cable. For optimum range and performance use, use Kramer's BC-DGKat524, BC-DGKat623 and BC-DGKat723 cables. Note that the transmission range depends on the signal resolution, graphics card and display used. The distance using non-Kramer CAT 5, CAT 6, and CAT 7 cables may not reach these ranges. Use only shielded cable where both ends of the shield are soldered to ground.
• Control - Front panel and contact closure switching.
• Indicators - Status LEDs for input selection, output, link and power.
• Compact MegaTOOLS® - 2 units can be rack mounted side-by-side in a 1U rack space with the optional RK-T2B universal rack adapter.

TP-582T - Specifications

TP-582T - Contents

• 1 x Kramer TP-582T 2x1 HDMI Plus Bidirectional RS-232, Ethernet & IR over Twisted Pair Switcher/Transmitter
• 1 x Power Supply