Teradek Bolt 500 SDI/HDMI Video Transmitter/2x Receiver Deluxe Set + Sidekick II

SKU: VTXTEK146
Teradek Bolt 500 SDI/HDMI Video Transmitter/2x Receiver Deluxe Set + Sidekick II
RRP: $7570.00
PAY: $6965.00   INC GST
SAVE: $605.00
Quantity
Guaranteed Australian
sourced and warrantied

0 out of 5
0 Reviews

TD-BOLT-935-2 - General Description

.Wireless Video Refined

Bolt transmits visually lossless 4:2:2 video over the unlicensed 5GHz band at less than 1 millisecond of delay. Bolt’s new firmware ensures your system reaches its full potential right out of the box. We’ve also improved reconnect times so your wireless link is restored instantly when you come back into range.

Reliable Transmission in Any Environment

Operate more than twice as many wireless systems at one location or evade heavy interference. With Bolt 3000, you can transmit over 20MHz channels for a more robust signal in challenging RF conditions.

*20MHz channels allow you to operate more wireless systems at once in a single location and offer a more robust wireless link in challenging RF conditions. However, audio transmission, as well as interlaced, PSF, and 1080p60/50 frame rates are not currently supported.

Smaller, Lighter, and Even More Rugged

The Bolt 1000 and 3000 transmitters are 20% smaller than previous systems and lighter too. We’ve also improved their resilience in high heat conditions so that they operate flawlessly all the way up to 130F.

Sidekick II: Universal Bolt Receiver

Compatible with Bolt 500, 1000, and 3000, the 300ft Sidekick II is the perfect solution for a director’s monitor kit. With an SDI output, support for timecode and start/stop flags, and a built-in test pattern generator, this universal receiver is the most affordable way to monitor a Bolt feed on set.

More Channels to Transmit Over

Bolt also offers manual frequency control so your crew can carefully manage your wireless workflow wherever you’re shooting. The Bolt 3000 can operate on 2 new DFS channels, allowing interference-free video transmission in more environments than ever before.

Transmit to Multiple Receivers

All Bolt models are multicast capable up to 4 receivers of the same range at the same time. This means you can send your video feed to monitors, switchers, recorders, and even Teradek Cubes simultaneously with no loss in quality or added delay.

Built-in Cross Conversion

Every Bolt model supports real-time standards and cross conversion from TX to RX, allowing you to automatically convert resolution, frame rate, and inputs.outputs (HDMI / 3G-SDI) without any additional hardware.

Metadata & Time Code Support

All 3G-SDI Bolt models support metadata, timecode, and start/stop flags from many camera manufacturers, including RED, ARRI, Canon, Sony, and Panasonic.

3D LUT Integration

Apply the look you’re after directly to your wireless video feed using Bolt’s integrated 3D LUT technology. Upload your own LUTs using the free Bolt Manager software or select from a number of built-in presets using Bolt’s OSD.

Cut Through the Interference

The Panel Array Antenna is your go-to solution for cutting through wireless interference in crowded environments. When attached to a Bolt 1000 or 3000, the antenna provides an extremely robust directional signal that will ensure your signal arrives uninterrupted.

Built-In HDMI to SDI Converter

Perfect for use with MoVI and other gimbals, Bolt’s TX features a built-in HDMI to SDI converter, allowing you to connect both your on-camera monitor and video source via the same device.

Forget About Capture Cards

Bolt’s USB 3.0 GRAB Engine allows you to ingest a Bolt feed directly into a computer or your DIT cart without any added delay or loss of quality.

The Bolt Identity

To better identify which systems are paired on set, a removable top plate on Bolt’s TX and RX can be swapped out for a colorful anodized one.

Built Like a Tank

Bolt is housed in a hardened aluminum chassis designed to withstand years of abuse in both extremely hot and cold conditions. Both the TX and RX feature 1?4”-20 holes for mounting to cameras and monitors as well as 2-pin Lemo connectors for power. Unique to Bolt 1000 and 3000, a built-in OLED on the RX allows you to quickly configure the system as well as apply 3D LUTs at the touch of a button.

Sidekick II: Universal Bolt Receiver

Compatible with Bolt 500, 1000, and 3000, the 300ft Sidekick II is the perfect solution for a director’s monitor kit. With an SDI output, support for timecode and start/stop flags, and a built-in test pattern generator, this universal receiver is the most affordable way to monitor a Bolt feed on set.

TD-BOLT-935-2 - Features

  • Longer Range: Transmit visually lossless video up to 500ft with no delay.
  • 20MHz Channels: Use more than twice as many Bolts in one location or avoid interference like never before.
  • 2 New DFS Channels: Operate interference-free more often in the USA and Europe by making use of two newly introduced DFS channels.
  • 20% Smaller Chassis: Not just smaller, but lighter too, allowing these models to integrate into any rig unnoticed.
  • Individual Identity: Easily identify which Bolt TX and RX work together with removable colored top plates.
  • Rapid Reconnection: Reconnect times during a dropped link are now instantaneous once you move back into range.
  • Built-In HDMI to SDI Converter: Perfect for use with MoVI and other gimbals, Bolt’s TX has a built-in HDMI to SDI converter, allowing you to connect both your on-camera monitor and video source via the same device.
  • More Robust Than Ever Before: Reach your Bolt’s full range and potential right out of the box with new software that provides the most robust wireless link we’ve ever created.
  • Sidekick II: SDI Ouput with 2 Pin Power Connector
  • Supports 20 MHz channels when paired with Bolt 3000
  • 300 Ft Range
  • Supports Timecode and Start/Stop Flags
  • Compatible with Bolt 500, 1000, 3000
  • Built-In Test Pattern Generator
  • Super Lightweight and Compact

TD-BOLT-935-2 - Specifications

TX - Video
Video Inputs:1 x 75 Ohm BNC
• 1 x Type A receptacle HDMI
Video Outputs:1 x 75 Ohm BNC (Loop-out
Sdi Ancillary Data Support:Supports transmitting metadata, timecode, and start/stop flags from certain camera manufacturers. Please refer to:
• https://support.teradek.com/hc/en-us/articles/217446087
Inputoutput Summary:3G-SDI & HDMI
Color Sampling:SDI: YCbCr 4:2:2, 10-bit (8-bit when format conversion is enabled)
• HDMI: RGB 4:4:4, 8-bit
Latency Summary:0.001 seconds
Delay Tx To Rx:0.001sec (when no video format conversion is enabled
Supported Resolutions:1080p 23.98/24/25/29.97/30/50/59.94/60
• 1080psf23.98/24/25/29.97/30
• 1080i50/59.94/60
• 720p50/59.94/60
• 480p59.94/576p50 (via HDMI ports only)
• 480i(NTSC)/576i(PAL
Color Correction:CDL/1024 1D LUT (supports 10-bit color)
• 33x33x33 3D LUT (supports 10-bit color
Audio Compression:48kHz 24-bit PCM
Audio Input:Embedded Audio Input

TX - Network
Wireless:Non-DFS Frequencies:
• US: 5.19 ~ 5.23 GHz and 5.755 ~ 5.795 GHz
• EU & JP: 5.19 ~ 5.23 GHz
• DFS Frequencies:
• US: 5.27 ~ 5.55 GHz and 5.67 GHz
• EU & JP: 5.27 ~ 5.67 GHz
Rf Channel Selection:Auto only (NOT configurable
Encryption:AES-128
Rf Power:17dBm EIRP
Range Summary:bold~500 ft
Range:Up to 500ft line of sight
Multicast Summary:Up to 4 RX
Unicast Multicast:Unicast / Multicast
Noise Rejection:Can coexist with WiFi and 5GHz cordless phones
Number Of 40 Mhz Channels:11

TX - Physical
Dimensions:24mm x 66mm x 102mm
Weight:299g
Construction:Milled Aluminum(Chassis) and regulation-compliant PCB
• Plastic Cap
Power Input:2-Pin Connector 7-28 VDC
Nominal Power Consumption:7.3 Watts (Measured at 1080p60
Operating Temperature:0 ~ 40 deg-C
Mountability:Multiple mounting options with 1/4" holes

RX - Video
Video Outputs:1 x 75 Ohm BNC
• 1 x USB 3.0 micro B receptacle
• 1 x Type A receptacle HDMI
Sdi Ancillary Data Support:Supports transmitting metadata, timecode, and start/stop flags from certain camera manufacturers. Please refer to:
• https://support.teradek.com/hc/en-us/articles/217446087
Inputoutput Summary:3G-SDI & HDMI
Color Sampling:SDI: YCbCr 4:2:2, 10-bit (8-bit when format conversion is enabled)
• HDMI: RGB 4:4:4, 8-bit
Test Pattern Generator Support:Custom output formatted test pattern over HDMI and SDI.

Sidekick II
Video Outputs:3G/HD/SD-SDI:BNC
Sdi Ancillary Data Support:Supports transmitting metadata, timecode, and start/stop flags from certain camera manufacturers. Please refer to:
• https://support.teradek.com/hc/en-us/articles/217446087
Inputoutput:3G-SDI
Color Sampling:For SDI: YCbCr 4:2:2, 10-bit
Supported Resolutions:1080p60/59.94/50/30/29.97/25/24/23.98
• 1080psf30/29.97/25/24/23.98
• 1080i60/59.94/50
• 720p60/59.94/50
• 480p59.94/576p50 (via HDMI ports only)
• 480i(NTSC)/576i(PAL
Video Compression:visually lossless
Test Pattern Generator Support:Custom output formatted test pattern over SDI
Audio Compression:48KhZ 24-bit PCM
Dimensions:25.0x85.5x114.0mm
Weight:10.1oz (288g
Construction:Milled Aluminum(Chassis) and regulation-compliant PCB
• Plastic Cap
Wireless:5GHz (20&40Mhz), DFS Frequencies Available
Rf Channel Selection:Auto only (NOT configurable
Encryption:AES-128
Rf Power:15dBm EIRP
Range Summary:300 ft
Range:Up to 300ft line of sight
Unicast Multicast:1 Bolt TX can transmit to a maximum of 4 RX
Noise Rejection:Can coexist with WiFi and 5GHz cordless phones
Power Input:2-Pin Connector 7-17 VDC
Nominal Power Consumption:6.9 Watts (Measured at 1080p60
Operating Temperature:0 ~ 40 deg-C

TD-BOLT-935-2 - Contents

  • General
  • 3 x HDMI 18in Cable (Type A to Type A)
  • 3 x SDI (BNC to BNC) Cable 10 inch
  • Transmitter
  • 1 x Thumb Screw 1.25 inch length (1/4"-20 inch)
  • 1 x Lightstand Adapter (1/4"-20 inch)
  • 1 x SDI (BNC to BNC) Cable 10 inch
  • 1 x USB 3.0 Cable A to Micro B (3ft Length)
  • 1 x PSU 2-Pin Lemo to 18W AC Adapter 6ft cable
  • 1 x 1-Year Warranty
  • Receiver
  • 1 x Thumb Screw 1.25 inch length (1/4"-20 inch)
  • 1 x Lightstand Adapter (1/4"-20 inch)
  • 1 x SDI (BNC to BNC) Cable 10 inch
  • 1 x USB 3.0 Cable A to Micro B (3ft Length)
  • 1 x PSU 2-Pin Lemo to 18W AC Adapter 6ft cable
  • 1 x 1-Year Warranty
  • Receiver 2
  • 1 x Thumb Screw 1.25 inch length (1/4"-20 inch)
  • 1 x Lightstand Adapter (1/4"-20 inch)
  • 1 x SDI (BNC to BNC) Cable 10 inch
  • 1 x USB 3.0 Cable A to Micro B (3ft Length)
  • 1 x PSU 2-Pin Lemo to 18W AC Adapter 6ft cable
  • 1 x 1-Year Warranty
  • Sidekick II
  • 1 x Video Cable (SDI BNC 18 inch)
  • 1 x Power Supply Unit (2-Pin Lemo 18W AC Power Adapter - 6 foot Cable)
  • 1 x USB Cable (Mini-USB to USB 18 inch)
  • 1-Year Warranty
This website is DigiCert approved.