The FS2 can simultaneously work with two independent streams of 3G/HD/SD 10-bit Broadcast quality video and two independent groups of 16 channel AES audio. Each FS2 video channel supports virtually any input or output: analog component or composite, 3G/HD/SD-SDI, Dual-Link and HDMI I/O. You can use the FS2 as two separate Frame Synchronizers/Format Converters, or combine the channels in a variety of powerful ways—for example HD sidebar keying where both the video and background graphics are upconverted and combined. To expand your possibilities further, each channel possesses its own still-store, keyer, and video proc amp/color corrector. The FS2 can up- or down-convert between SD and HD, and cross-convert between HD formats—including 3G 1080p50/60 formats. Additionally, the FS2 has full input and output signal routing, allowing any I/O port to be assigned to either processing channel.
For audio, the FS2 has two audio processors—each processor supporting 16-channel AES/EBU digital audio, 16 channel embedded audio, and 8-channel balanced analog audio with a variety of controls for maximum flexibility.
The FS2 supports closed captioning and the conversion of closed captioning between SD and HD formats—including full conversion between CEA-608 and CEA-708 caption standards. The FS2 is also network ready, supporting SNMP monitoring and web-based remote control. A 3rd-party Remote Control Panel is available (contact your AJA dealer—or AJA directly, for more information).
Options available on the FS2 include Dolby® E Encoding, Dolby® E Decoding, and 3G/HD/SD Optical Fiber I/O.
With support of all broadcast video formats the FS2 makes matching up disparate video and audio systems simple —one converter box does it all. The FS2 is ideally suited for broadcast facilities, production trucks and other rapidly changing environments.
The FS2 can be used for a wide variety of video and audio signal conversion, adaptation, timing, and processing applications:
Up/Down/Cross convert between various SD and HD formats including 1080p50/60.
General purpose video frame synchronization.
Analog-to-Digital and Digital-to-Analog audio/video conversion.
Mux or Demux two separate HD signals from one 3G SDI signal.
Convert 3G/HD/SD video over fiber to/from SDI (BNC).
Use the built-in video processing amplifiers to adjust and/or color correct.
Synchronize the timing of key and fill signals by putting both through the parallel FS2 video channels and adjusting their timing independently. Then key them using one of the two FS2 keyers or an external keyer.
Use the HDMI input and a DVI to HDMI cable to scan-convert popular computer video formats to SD or HD, including full proc-amp functionality and aspect ratio adjustment (future firmware release).
HD Sidebar keying including using both SD video and SD sidebar graphics (analog or digital), upconverting both, and combining—all inside the FS2.
Dolby® E encoding and decoding with full channel mapping (optional).
The FS2 can generally convert any input format to any output format, as long as the frame rates are of the same 'family.' (The three families are 59.94/29.97/23.98, 50/25, and 60/30/24.) Whenever an incompatible I/O format is detected, the operator is notified (alarms/status-messages). Connector sources and destinations are controlled via crosspoint matrix selections on the input and output of both FS2 channels (select from web UI or front panel).
|Video Inputs and Outputs:||Dual SDI inputs and outputs:|
Dual-link 1080p60, 1080p59.94,
1080p50, YCbCr (4:2:2),
HDMI Input (RGB or YCbCr 4:2:2)
HDMI Output (YCbCr 4:2:2)
HD component YPbPr/RGB (RGB is output only), SMPTE-274
Reference Input (color black or tri-level)
Optional: 2 fiber inputs and 2 fiber outputs via SFP modules/LC connectors available from AJA
|Video A/D, D/A:||12-bit|
2x oversampled (HD)
4x oversampled (SD).
|Audio Inputs and Outputs:||8 Channel Balanced, 25 pin D (Tascam pinout)|
16 Channel AES/EBU 25 pin D
32 Input Channel Mapping
16 Channel 3G/HD/SD-SDI Embedded
|Audio A/D, D/A:||24-bit, 48Khz|
|Audio levels:||12dBu, +15dBu, +18dBu, +24dBu (Full Scale Digital).|
|GPI:||4x GPI input, TTL, isolated|
4x GPI output, TTL, isolated
Depth: 15.5 inches (39.37 cm) (front panel to the back of the deepest connector)
|Power:||100-240 VAC, 50/60Hz|
|Options:||Dolby® E Encoding|
Dolby® E Decoding
Optical Fiber I/O
Remote Control Panel (3rd Party).