The Hi5-3D is a 3D video multiplexer that combines two 3G or HD-SDI Inputs into various multiplexed 3D formats for output on HDMI 1.4a and HD-SDI. The HDMI 1.4a output supports EDID transactions that allow automatic 2D/3D configuration per the HDMI monitor's capabilities. Input SDI 2 will be frame synchronized to input SDI 1 in 3D Modes. Embedded SDI input audio is embedded in both the HDMI and SDI outputs. 2 channel RCA audio output is also supported with user control of channel selection. The Hi5-3D supports AJA's Mini-Config application for user configuration and firmware download.
The Hi5-3D supports, depending on the video format, 'side-by-side', 'top-bottom', and 'frame- packing' 3D modes. The 'side-by-side' and 'top-bottom' modes involve compressing, either horizontally or vertically, each input for combining into a single video stream at the same rate of the inputs. The 'frame-packing' mode stacks two full resolution inputs into a 'tall' frame (at twice the clock and line rates). When selected, 'frame- packing' can only be used with 23.98/24Hz input frame rates.
Each input, in addition to 3D processing, can be flipped either horizontally, vertically, or both. This control is provided by 4 switches that can be engaged in any combination.
|Input Formats:||720p 50/59.94/60|
|Video Inputs:||Dual 3G and HD-SDI (auto-selected),|
1 SDI for left eye input (10-bit)
1 SDI for right eye input (10-bit
|Video output:||10-bit HDMI v1.4a|
1 3G/HD-SDI output, 10-bit
|Audio Outputs:||HDMI embedded audio, 2 or 8 channels|
2 RCA-style analog outputs at -10dBV (nominal), User assignable channels
|Size:||147mm x 79mm x 25mm|
|Power:||5-20 VDC regulated, 5 watts (included|