AJA RovoRX-HDMI HDBaseT to HDMI (w/ PoH), also facilitates power/display/control/interface to RovoCam

AJA RovoRX-HDMI HDBaseT to HDMI (w/ PoH), also facilitates power/display/control/interface to RovoCam



AJA RovoRX-SDI UltraHD/HD HDBaseT Receiver

Regular Price $1,725.00 Special Price $1,558.00
UltraHD/HD HDBaseT Receiver to 6G/3G-SDI and HDMI frame sync w/ PoH, Genlock

RovoRx-SDI is an UltraHD/HD HDBaseT Receiver with four integrated 6G/3G-SDI outputs and HDMI video and audio outputs specifically designed to receive RovoCam’s output. Receive the RovoCam’s video and audio up to 100m away from the camera, and output to SDI monitors, routers and recorders and HDMI TVs and devices. RovoRx-SDI also offers a DA (Distribution Amplifier) Mode for extensive output options. The HDBaseT connector on RovoRx-HDMI supports camera uncompressed video, audio, power, and control, all over a single Cat 5e/6 cable, greatly simplifying cabling and systems integration.

Flexible Connectivity

RovoRx-SDI offers a lot of power for HDBaseT workflows, receiving uncompressed video and audio, offering bidirectional VISCA support and PoH for powering RovoCam, all across a single Cat 5e/6 cable. With multiple 6G/3G-SDI outputs as well as HDMI, your options for distribution of RovoCam's UltraHD or HD imagery simplify any project's needs.

HDBaseT (RJ-45), Analog Video reference terminating Input

4x 6G/3G-SDI Outputs

1x HDMI 1.4 Output

1x RCA Stereo Output

1x REF In/Out

1x 3.5mm TRS Input for RS-232 bidirectional signals

1x RS232 for RovoControl software

Distribution Amplified

RovoRx-SDI uniquely offers a DA Mode for Distribution Amplification output of incoming HDBaseT video sources.

DA Mode allows one HDBaseT video source to be output via multiple 6G/3G-SDI connections, opening up the opportunity for simultaneous recording, routing and display of RovoCam imagery.

Power Up

PoH or Power over HDBaseT is a lifesaver for those working on live events, in studios and other signal sensitive environments. By supplying RovoCam's power from a remote location, signal interference is mitigated and cabling is greatly simplified. RovoRx-SDI can provide power to RovoCam or to third party HDBaseT transmitters, all across a single category cable alongside video, audio and control signals.

More Information
  • 4x 6G/3G-SDI outputs support video and embedded audio for incredible multi-format compatibility
  • 8-Channels (4 pairs) of SDI embedded audio supported
  • DA Mode for distributing 6G/3G-SDI UltraHD and HD signals from HDBaseT sources
  • HDMI simultaneous output for UltraHD and HD displays
  • REF in/out that can be genlocked with other broadcast gear
  • USB port for software configuration of SDI settings
  • Power over HDBaseT (PoH), allowing RovoCam to be powered remotely from its physical location
More Information
Video Formats:UltraHD) 3840 x 2160p 25, 29.97
(HD) 1080p 50, 59.94
(HD) 1080i 25, 29.97
(HD) 720p 50, 59.94
(SD) 625i
(SD) 525i
Video Input:HDBaseT (RJ-45), Analog Video reference terminating input
Video Outputs:HDMI 1.4b, No EDID negotiation, No embedded audio
6G-SDI output on SDI 1-4
4 x 6G-SDI while in 'DA Mode'
UltraHD 3840 x 2160p 25, 29.97
UltraHD 4:2:2 or 4:4:4 (4 x BNC)
UltraHD LFR 3.0 GB 2SI (2 x BNC)
UltraHD LFR 1.5 GB 2SI (4 x BNC)
3G-SDI (Level A or B)
(HD) 1920 x 1080p 50, 59.94
(HD) 1920 x 1080i 50, 59.94
(HD) 1280 x 720p 50, 59.94
(SD) 625i 50
(SD) 525i 59.94
Audio Output Digital:2-Channels (1 pair) of SDI embedded audio supported
Rates supported: 48 kHz

*No Audio on HDMI output
Audio Output Analog:2 x RCA connectors, 2-Channel unbalanced

*NOTE: This feature only works when used in conjunction with RovoCam Audio
RS-232:1 x 3.5mm TRS Input for RS-232 bidirectional signals
USB Config:1 x USB
Size (w x d x h):4.66” x 6.97” x 0.94” (118mm x 177mm x 23.9mm
Weight:0.8 lbs (0.4kg
Power:RovoRx-SDI only: 48V @ 303mA = 14.5W typical, 48V @ 335mA = 16W max
RovoRx-SDI powering RovoCam: 48V @ 450mA = 21.6W typical, 48V @ 480mA = 23W max
Environment:Safe Operating Temperature: 0 to 40 degrees C (32 to 104 degrees F)
Safe Storage Temperature (Power OFF): -40 to 60 degrees C (-40 to 140 degrees F)
Operating Relative Humidity: 10-90% noncondensing
Operating Altitude: <3,000 meters (<10,000 feet