GPI & Tally interface provides 8 contact closure inputs and 8 contact closure outputs for connecting to ATEM switchers and Videohub routers
GPI & Tally interface provides 8 contact closure inputs and 8 contact closure outputs for connecting to ATEM switchers and Videohub routers.
Tallies will be displayed when connected to an ATEM switcher to indicate their 'on-air' status and you can even connect multiple interfaces together to increase the number of inputs and outputs. GPI and Tally Interface also works as a Videohub control panel without buttons and LEDs so you can make your own! Now anyone can connect to Videohub routers to control cross-points
|
Connections | |
---|---|
Contact Closure | 25 pin D-type connector providing 8 up to isolated inputs and 8 relay contact closure outputs |
Inputs | Optical isolators triggered by connection to ground (maximum 5 V @ 14 mA) |
Outputs | Mechanical relay contact closure to ground (maximum 30 V @ 1 A) |
Ethernet | 10 / 100 BaseT with loop through for connecting to other Ethernet enabled equipment |
Computer Interface | 1 x USB 2.0 high speed interface for configuration and firmware updates |
Extras | |
---|---|
Software Included | Configured via ATEM Switcher utility |
Firmware Upgrade | Firmware built into software driver. Loaded at system startup or via updater software |
Operating System | Microsoft Windows 7 and Apple Mac OS X |
Power Supply | 12 V power supply included with international socket adapters for all countries |
|