Benro TTOR24CLVS4PRO Video Tripod Kit • 24CLV Tortoise Carbon Fiber 2 Series Tripod System with S4PRO Fluid Head

Benro TTOR24CLVS4PRO Video Tripod Kit • 24CLV Tortoise Carbon Fiber 2 Series Tripod System with S4PRO Fluid Head

Benro BV4PRO Video Tripod Kit • BV4PRO Fluid Head with A673TMAL Dual-Stage Tripod

Benro BV4PRO Video Tripod Kit • BV4PRO Fluid Head with A673TMAL Dual-Stage Tripod

Benro TTOR34CLVS4PRO Video Tripod Kit • 34CVL Tortoise Carbon Fiber 3 Series Tripod System with S4PRO Fluid Head

Regular Price $588.50 Special Price $542.00
  • 8.8 lb Payload, 2-Step Counterbalance
  • Flat Base Fluid Head
  • Leveling Ball to Flat Base Fitting
  • 9.25 to 64.37" Height Range
  • Three Locking Leg Positions
  • Removable Rubber Feet, Spikes Included
SKU
TRIBEN135

The Tortoise Carbon Fiber 3 Series Tripod System with S4Pro Video Head from Benro is a portable travel-friendly system that supports up to 8.8 lb loads and has a working height range of 9.25 to 64.37". The head features a flat base, which makes it well suited to sliders and jibs, while the legs have a leveling ball to flat base head fitting, allowing you to mount the S4Pro to the legs and take advantage of the quick leveling capabilities of a ball base. The carbon fiber legs utilize twist locks leg locks for fast and secure setup. The head fitting on the legs incorporate a 1/4"-20 accessory mounting port, allowing you to attach a variety of accessories. The carbon fiber legs feature independent movement with three locking angles and a push-button locking system. The rubber feet feature three distinct contact surface providing a grip whether the legs are vertical, on an angle, or nearly horizontal when positioned. You can remove the rubber feet and replace them with the included spiked feet if you wish.

The S4Pro head has two steps of counterbalance and features fixed pan and tilt drag and has independent pan and tilt locks. The tilt range is +90/-65°, while the pan range is a full 360°. The included camera plate can be adjusted forward/backward to let you find the optimal balance for your camera. An integrated safety catch helps ensure that the plate doesn't accidentally slide free and introduce your camera to the effects of gravity. Two camera screws are supplied—1/4"-20 and 3/8"-16—that can be stored underneath the camera plate on the head itself, in dedicated slots. For attaching accessories, there's a 1/4"-20 threaded hole on each side of the head to which you can secure articulating arms.

Camera Plate
More Information
Camera Plate Features Sliding Balance Plate
Camera Mounting Screw 1 x 1/4"-20 Male
1 x 3/8"-16 Male
Safety Lock Yes
Plate Dimensions 4.13 x 1.97" / 10.49 x 5 cm
  Head
Base Mount 3/8"-16 Female
Flat Base
Counter Balance Incremental 2-Step
Pan Handle Fittings 2 x Rosette
Bubble Level 1
Accessory Mounting 2 x 1/4"-20 Female Thread
  Pan & Tilt
Drag Control Pan: Fixed
Tilt: Fixed
Drag Type Fluid
Vertical Tilt +90° to -65°
Panning Range 360°
Independent Pan Lock Yes
Independent Tilt Lock Yes
  Legs
Leg Lock Type Twist Lock
Leg Positions 3 Positions
Independent Leg Spread Yes
Leg Sections 4
Leg Diameter 1.13" / 28.6 mm
0.99" / 25.2 mm
0.86" / 21.8 mm
0.72" / 18.4 mm
Feet Features Rubber, Removable, Spiked
Spreader None
  General
Load Capacity 8.82 lb / 4 kg
Maximum Working Height 64.37" / 163.5 cm (without Spreader)
Minimum Working Height 9.25" / 23.50 cm (without Spreader)
Folded Length 25.98" / 66 cm
Materials Aluminum, Carbon Fiber
Weight 6.17 lb / 2.80 kg
More Information
  • Flat Base to Ball Head Adapter
  • Carbon Fiber Tripod Legs
  • 4mm Allen Key
  • 2.5mm Allen Key
  • 3 x Spiked Feet
  • Carrying Case
  • 5-Year Warranty