The ENDURA ELITE is the ideal battery for today’s generation of HD ENG/EFP cameras. At 136Wh capacity, the ENDURA ELITE was created with a focus on the demands of HD power consumption. Two identical cartridges which can reduce the cost of replacement batteries. The unique twin power cartridge design ensures the ENDURA ELITE is fully compliant for air transportation and is the only Li-ion battery over 100Wh that is IATA flight friendly. The ENDURA ELITE supports Digi-View and i-Trax Battery Management System, and is compatible on all IDX ENDURA V-Mount chargers. PC-14 is the replacement power cartridge and BH-2 is the housing for use in ENDURA ELITE batteries. ENDURA ELITE Power Status is uniquely designed with a 10 step remaining power indicator. The remaining power is shown in increments of 10% by solid/flashing combination of the 5 LEDs.
This battery does not allow the remaining charge to be viewed in-camera. The sister ELITE model does.
|Battery Capacity:||14.8V, 9.2Ah, 136Wh|
|Max. Output Voltage:||16.8V DC|
|Nominal Voltage:||14.8V DC|
|End Voltage:||12V (factory setting) with an option to|
deactivate. Please check camera
specification for optimum performance.
|Battery Protection:||Built into individual Power Cartridges:|
Over charge (reset)
Over discharge (reset)
Over current (reset)
Temperature protection (non reset
|Ambient Temperature:||To charge:|
32°F ~ 104°F (50°F ~ 86°F recommended)
-4°F ~ 122°F (50°F ~ 104°F recommended)
-4°F ~ 140°F (32°F ~ 68°F recommended
|Dimensions:||3.94(W) x 6.69(H) x 2.76(D) inches|
|Weight:||2.76 lbs. approx.|