Includes Light, AC Adapter, Barn Door & Yoke.
As the name implies, the LS800 Studio LED Light from Cineroid is a natural on set, but it also has DC capability that allows you to enjoy the same quality of light on location. Variable color temperature from 3,000 to 5,600K or anywhere in between means that you can quickly match the ambient or artificial light balance with a simple adjustment on the light's back panel, instead of time-consuming gel filtration. The LS800 is also flicker-free and fully dimmable in 30 steps, eliminating the need for neutral density filters or pulling the unit farther away from the subject to reduce light intensity. Settings are displayed on the light's bright digital display, and it's dead quiet on set thanks to a passive heat sink cooling system. Since the LS800 has a built-in DMX decoder, adjustments can also be made remotely using a control console. Built-in 4-way barndoors add directional control of the unit's wide 120-degree beam angle.
While the high-output panel generates 4,400 lux, you won't have to be concerned about the talent's comfort - the LS800 runs barely warm to the touch. And with power consumption of only 120W, you'll worry less about the bottom line while benefiting from a rapid return on your investment. A long lamp life of approximately 50,000 hours removes the need for a duty cycle and makes the LS800 virtually maintenance-free.The LS800's durable aluminum frame is supported by a sturdy, U-shaped yoke with locking knobs on each side and a standard 5/8" receiver. A diffuser is included to soften the light output. The light can be used worldwide, powered by the included multi-voltage power adapter or by pro battery sources when mains power is unavailable. Just add an optional Gold Mount or V-Mount battery plate or a D-Tap cable.
|
Light Source | LED |
Beam Angle | 120° |
Photometrics | 4,400 lux @ 3.28' (1.0 m) |
Color Range | 3000 - 5600K, ±200K |
Dimming | Full dimming in 30 steps |
Operating Voltage | System: 10 - 17 V (via optional D-Tap cable, AB or V-Mount battery plates Multi-voltage AC (via included adapter) |
Power Consumption | 120 W |
Mount | Yoke with (16 mm) receiver 1/4"-20 Tap |
Dimensions | (360 x 150 x 32 mm) |
Weight | (1.61 kg) |
|
http://www.cineroid.com |