Livestream's Mevo Live Event Camera combines a camera, a live streaming platform, and a video switcher to form an all-in-one story-telling device. Despite its palm-sized form-factor, the Live Event Camera fits a UHD 4K sensor behind a 150° wide-angle lens.
Livestream's Mevo Live Event Camera combines a camera, a live streaming platform, and a video switcher to form an all-in-one story-telling device. Despite its palm-sized form-factor, the Live Event Camera fits a UHD 4K sensor behind a 150° wide-angle lens. This configuration endows the Live Event Camera with the capability of supporting 9 virtual camera angles at 720p resolution. Each virtual angle is controllable and selectable via the free iOS app (requires iOS 9.3 or later operating on iPhone 5s or newer) or Android app (requires Android 6.0 or higher and a compatible device). Using touch-based gestures; you can control each angle as if it was a real camera with a zoom lens on a tripod. With the Live Event Camera you can stream directly on the Livestream, Facebook Live, Periscope, and Twitter platforms. Alternatively use the UHD 4K resolution of the sensor to record sharp video directly to the internal SD card.
Note: check the Mevo website for updated iOS and Android mobile device compatibility
If you have a Livestream subscription, or an account on Facebook, Periscope, or Twitter, you can connect the Live Event Camera via Wi-Fi, and broadcast your event over the web, having this tiny camera replace up to 9 physical cameras and a switcher. Better yet, the camera can record internally and stream simultaneously. The best connection scenario is having the camera connect to a broadband Wi-Fi network, which it can leverage for the most reliable video. However, if you connect it directly to your iPhone's access point, you can stream using your cell provider's LTE network (data charges may be applicable depending on the provider). Quality will automatically adapt to the available bit rate(5 Mbps minimum required for streaming), so your viewers will experience the best quality possible for a given scenario.
Depending on the streaming platform, resolutions of up to 1080p can be streamed live, though you have the option of 720p streaming to conserve bandwidth.
Atop the camera is a status LED which displays current recording and network connection status. It can also act as a tally light, illuminating the approximate direction the current virtual camera is pointing. A rear USB port can be used for power, charging the internal battery, and data transfer from the microSD card to a computer. The internal battery will last for up to an hour on a full charge. For longer events, a 10' USB power cable is included, so when the camera is plugged in, there will be ample slack for placing the camera away from the wall.
Do more with your Livestream Live Event Camera by attaching it to the Mevo Boost. Once attached via the electronic interface, the Boost becomes an extension of the Live Event Camera. Inside the Boost is a 12,000mAh battery which can increase the operating time of the Live Event Camera from one hour to 10 hours. Near the base of the Boost are 3 ports; one Ethernet port for reliable data transfer when streaming, a USB type-A port which can either charge a smartphone or connect to an LTE stick for wireless streaming, and a USB mini-B port for charging and powering the Boost itself. A 5/8"-27 screw at the base can be adapted to fit 1/4"-20 and 3/8"-16 threads via adapters included with the Live Event Camera, and will natively mount to a standard microphone stand thread.
Inside the Mevo Case you can store a Mevo Live Event Camera and production essentials for protection and transport. The outer shell is durable and features a carrying handle and zippered closure, while the interior is custom lined to fit the Mevo Live Event Camera and accessories. A separate mesh compartment can hold additional small bits of equipment or tools. Since the case is lightweight, it's easy to take on the road wherever your productions take you.
Mount your Mevo Live Event Camera up to 6' high on the Mevo Camera Stand. This three-section stand will provide eye-level or higher views, and collapses to a minimum height of 25". A detachable ball-head mount with a 1/4"-20 stud provides maximum flexibility for positioning and angling your camera.
The Mevo Stand is compatible with US and metric–threaded mic clips and accessories. It has a folded length of 22" and includes a carrying bag.
|Sensor||Not specified by manufacturer|
|Pixel Gross||12.4 MP|
|Effective Pixels||Not specified by manufacturer|
|Angle of View||Ultra Wide: 150°|
|Video Format||3840 x 2160p at 30 fps (40 Mbps H.264)
1920 x 1080p at 30 fps (20 Mbps H.264)
1280 x 720p at 30 fps (10 Mbps H.264)
|Exposure Modes||Modes: Auto|
|White Balance Modes||Auto
|Tripod Mount||5/8" - 27|
|Dimensions (W x H x D)||2.0 x 2.5 x 2.0" / 50.0 x 63.0 x 50.0 mm|
|Weight||4.6 oz / 130.4 g|
|Box Dimensions (LxWxH)||7.0 x 4.9 x 4.4"|
Mevo Boost by Livestream
|Battery Capacity||12,000 mAh|
|Connectors||1 x 10/100 Ethernet (RJ45)
1 x USB type-A
1 x USB micro-B
|Power Output||Via USB type-A: 5 VDC @ 0.5 A|
|Power Input||Via USB micro-B: 5 VDC @ 2.1 A, 9 VDC @ 2 A, or 12 VDC @ 1.5 A|
|Environmental||Weatherproof to IPX4 rating|
|Dimensions||6.2 x 2" / 157 x 50 mm|
|Weight||10.6 oz / 30 g|
|Box Dimensions (LxWxH)||8.0 x 4.8 x 4.3"|
|Dimensions||11.8 x 6.3 x 3.5" / 30 x 16 x 16.5 cm|
|Weight||1.1 lb / 0.5 kg|
|Box Dimensions (LxWxH)||11.4 x 6.7 x 4.0"|
Mevo Camera Stand (6')
|Head Type||Ball head|
|Mount Interface||1/4"-20 stud|
|Maximum Height||58.3" (148 cm)|
|Minimum Height||24.6" (63 cm)|
|Folded Length||22" (56 cm)|
|Box Dimensions (LxWxH)||27.5 x 4.0 x 3.5"|