The Teradek Beam is a full HD camera-back H.264 encoder, capable of delivering stunning video at bit rates up to 50Mbps.* Beam utilizes the unlicensed 5GHz band and can transmit video up to 2500ft with just 2 frames of latency. Whether the job requires a wireless link back to the OB Van or an MPEG-TS stream back to the station, Beam gives broadcasters unparalleled flexibility in the field.
*Transmitting above 30Mbps requires using the LAN port.
With a 3G-SDI input and your choice of AB- or V-mount battery plates, Beam seamlessly integrates with all popular professional cameras. The chassis also includes an OLED screen for quick configuration, LAN port for broadcasting over wired networks, and a bidirectional serial port for camera control.
Beam is multicast capable to up to 4 receivers and includes a dedicated bidirectional IFB channel, which allows a news operations center to speak directly to the camera operator in the field. Beam also supports high power transmission on the 5.15 ~ 5.25GHz band in accordance with FCC regulations. This means that your wireless video feed will be more resilient and get better range.
Beam is compatible with the RTSP and MPEG-TS protocols, giving broadcasters the ability to transmit video over the Internet to a Beam decoder or directly to computers at very high bit rates. The Beam decoder can also act as an RTSP server, which will re-stream your video feed directly to a local computer.
|Video Compression:||H.264 Baseline Profile Level 4.2 with de-interlacing|
|System Latency:||90 - 110 millisecond delay between Transmitter and Receiver|
|Wireless range:||2500ft +- 200ft|
|Digital Video In/Out:||SD-SDI, HD-SDI, 3G-SDI|
|Video Port:||RX: SDI output|
|Supported Video Resolutions|
|SMPTE244:||480i59.94 (NTSC), 480i60 (861-D|
|SMPTE 296M:||720p23.98, 720p24, 720p25, 720p29.97, 720p30, 720p50, 720p59.94, 720p60|
|SMPTE 274M:||1080i50, 1080i59.94, 1080i60, 1080PsF23.98,1080PsF24, 1080PsF25, 1080PsF29.97, 1080PsF30, 1080p23.98, 1080p24, 1080p25, 1080p29.97, 1080p30, 1080p50, 1080p59.94, 1080p60|
|SMPTE 259M BI.656:||SDTV Digital Signal/Data Serial Digital Interface|
|SMPTE 292M BT.1120:||1.5Gb/s Signal/Data Serial Digital Interface|
|SMPTE 425M:||3Gb/s Signal/Data Serial Digital Interface|
|SMPTE 299M:||16bit Digital Audio Format for SMPTE 292M|
|SMPTE 352M:||Video Payload Identification for Digital Interfaces|
|RTSP Server:||Up to 30Mbps|
|MPEG2-TS Server:||Up to 15Mbps|
|Main Digital Audio Out|
|RX:||SDI embedded audio: 48kHz 16-bit stereo linear PCM|
|Main Analog Audio Out|
|RX:||48kHz 16-bit stereo linear PCM with mini stereo phone output jack|
|Talk-Back Analog Audio In|
|RX:||8kHz 16-bit stereo linear PCM with mini stereo phone input/output jack|
|Radio standard:||IEEE 802.11a/n: OFDM|
|Frequencies:||U-NII-1 (5.15-5.25 GHz), U-NII-3 (5.725-5.85 GHz|
|Antenna:||3T x 3R MIMO, 3 antennas per WiMi6200TW/W1Mi6200RW|
|Security:||802.1x, 802,11i, WPA2, WPA and WEP 64/128 TKIP 128bit AES|
|WPS:||Wireless Protected Setup for easy set up and security configuration|
|Ethernet LAN:||10/100 BASE-TX, RJ-45 jack|
|Multicast:||WiFi: Up to 4 Receivers|
LAN: No limit on number of receivers
|External Control:||Full duplex RS422 serial port|
|USB:||Factory reset, IP configuration or firmware upgrade without PC|
|Power Input/Consumption:||DC 7V-17V, 12 Watt|
|Dimensions (H x W x D) (mm):||170 x 105 x 28 each board assembly (TX or RX|
|Weight (g):||RX: 610g|
|Operating Temperature:||0 deg C to 50 deg C|