Teradek Bolt Pro 500 SDI/HDMI Video Transmitter/2x Receiver Set

Teradek Bolt Pro 500 SDI/HDMI Video Transmitter/2x Receiver Set

Teradek Bolt 300 HDMI Video Transmitter/Receiver Set

The Teradek Bolt is a zero delay (< 1ms) wireless video system that transmits uncompressed 1080p60, 4:2:2 video up to 2000ft over the unlicensed 5GHz band. All Bolt models are multicast capable up to 4 receivers, support timecode and metadata pass through, and include the USB 3.0 GRAB Engine.
Regular Price $3,210.00 Special Price $2,905.00
SKU
VTXTEK139

The Teradek Bolt is a zero delay (< 1ms) wireless video system that transmits uncompressed 1080p60, 4:2:2 video up to 2000ft over the unlicensed 5GHz band. All Bolt models are multicast capable up to 4 receivers, support timecode and metadata pass through, and include the USB 3.0 GRAB

Bolt Pro 300

The Bolt Pro 300 offers up to 300ft of zero latency wireless video, perfect for focus pullers and director’s monitors. The 300 model comes in HDMI, 3G-SDI, and dual I/O varieties and includes a new fan-less receiver design with internal antennas. Like all Bolt models, the 300 also includes the new USB 3.0 GRAB Engine.

USB 3.0 GRAB Engine

Capture cards are a thing of the past with Teradek’s new GRAB Engine. Every Bolt RX includes a USB 3.0 output that allows you to ingest Bolt’s uncompressed video feed directly into a computer or DIT cart with no added delay.

Real-Time Cross Conversion & Extras

All Bolt models support real-time format conversion from TX to RX, allowing you to automatically cross convert from HDMI to 3G-SDI (or vice versa) without any extra hardware. Each model also outputs a test pattern when the video signal is lost and both the 600 and 2000 models support quick RX pairing via the OLED screen and manual frequency selection.

  • HDMI
  • GRAB RX
  • 5GHz
  • 1080p60
  • Multicast
  • Fanless RX
  • Metadata/Timecode
features-section
specifications-section
Video
Video resolution:1080p60/59.94/50/30/29.97/25/24/23.98
1080psf30/29.97/25/24/23.98
1080i60/59.94/50
720p60/59.94/50
480p59.94/576p50 (via HDMI ports only)
480i(NTSC)/576i(PAL
Color sampling:Y:Cb:Cr = 4:2:2, 8-bit for SDI (10-bit with no format conversion and FPGA v.1.1.0 or later); RGB 4:4:4 (HDMI out, 8-bit color

Inputs
Transmitter:1 x Type A receptacle HDMI
Receiver:No

Outputs
Transmitter:1 x 75 Ohm BNC(Loop-out
Receiver:1 x USB 3.0 micro B receptacle
1 x Type A receptacle HDMI

Video
Delay(TX to RX):0.001sec (when no video format conversion is enabled
Audio Format support:48kHz 24-bit PCM

Wireless
Frequency:Non-DFS Frequencies:
US : 5.19 ~ 5.23 GHz and 5.755 ~ 5.795 GHz
EU & JP : 5.19 ~ 5.23 GHz
DFS Frequencies:
US : 5.27 ~ 5.55 GHz and 5.67 GHz
EU & JP : 5.27 ~ 5.67 GHz

RF power
Transmitter:17dBm EIRP
Receiver:15dBm EIRP

Wireless
Range:Up to 300ft line of sight
Unicast / Multicast:Both

Menu Joystick
Transmitter/Receiver:No/Yes

Wireless
Noise rejection:Can coexist with WiFi and 5GHz cordless phones

Power Input
Transmitter:2-Pin Lemo 7-28 VDC
Receiver:2-Pin Lemo 7-28 VDC
Internal battery:No

Power Consumption (1080p60)
Transmitter:6.5 Watts
Receiver:8.2Watts

LCD screen
Transmitter:No
Receiver:Yes

Size
Transmitter:1.06x2.61x4.42inches(27.0x66.1x112.3mm
Receiver:1.0x3.5x5.8inches(25.2x88.9x146.5mm

Weight
Transmitter; Receiver:9.2oz(262g); 12.2oz(346g

General
Firmware:Upgrade via Mini-USB
Operating temperature:0 ~ 50 deg-C
Chassis material:Cap: Plastic
Body: Milled Aluminium
Hot-shoe mount
Mountability:Multiple mounting options with 1/4' holes

  • Comes with a Bolt Pro 300 HDMI Transmitter AND a Bolt 300 HDMI Receiver
  • 1/4 20' Thumb Screw
  • 1/2 20' Lightstand Adapter
  • PSU 2-Pin Lemo 18W
  • Hot Shoe Adapter
  • Bit 118 P-tap to 2-pin Lemo
  • 2x HDMI Cable
  • 1-Year Warranty
contents-section