Use this versatile advanced version of the Unified Accessory Kit from Wooden Camera to support your Blackmagic Pocket Cinema Camera 4K.
Use this versatile advanced version of the Unified Accessory Kit from Wooden Camera to support your Blackmagic Pocket Cinema Camera 4K. The kit comes with a formfitting cage to protect your camera, a wooden top handle, a 15mm quick release baseplate with two 15mm rod ports, a 3" Ultra Arm monitor mount with 1/4"-20 screws, an 8" safety dovetail plate, and two 12"-long 15mm rods. The cage features numerous 1/4"-20 and 3/8"-16 threaded holes for mounting additional accessories. The kit weighs approximately 3.9 lb and measures 16 x 5 x 6" when assembled.
Kit out your Blackmagic Pocket Cinema 4K camera for pro-style video capture with Wooden Camera's Unified BMPCC4K Camera Cage with wooden handle. The cage protects your camera on three sides while maintaining access controls on the right grip and the camera's left side. A Manfrotto quick release system on the bottom of the cage enables quick mounting and detaching from Manfrotto-compatible tripod heads and other supports.
The cage's wooden top handle offers comfortable handheld operating and can be folded down for storage. The top handle can alternately be mounted to the left vertical rod as a secondary grip. Mount accessories to the 1/4"-20, 3/8"-16, and ARRI-style threads lining the top and sides of the cage. The cage incorporates a lens-adapter support system that is compatible with most Wooden Camera and Metabones 1/4"-20 adapters.
The top of the Unified BMPCC4K Camera Cage leaves the space above the camera's accessory shoe unobstructed for mounting audio accessories, such as XLR adapters. An HDMI right-angle adapter and cable clamp protect the camera's HDMI port from cable snags.
Expand the capabilities of your Wooden Camera Unified DSLR Cage with the Unified DSLR 15mm Baseplate. The baseplate itself holds 15mm rods at the correct placement to comply with the lightweight support (LWS) standard. Four height-adjustable posts secure to the base of the small or medium variations of the Unified DSLR Cage to ensure the correct optical axis height (the large variation of the cage has its own built-in rod clamp). The bottom of the baseplate has a dovetail clamp quick release enabling convenient tripod mounting. The dovetail clamp complies with the ARRI dovetail standard and can be easily secured to all dovetail plates of that standard, as well as Wooden Camera's own dovetails and shoulder rigs. Having multiple quick release options in a single system enables you to remove the entire rig from the tripod to go handheld, or just the camera from the rig for a minimalist setup.
This is a single, 12" long 15mm Support Rod from Wooden Camera for mounting accessories. It is chamfered at each end to ease sliding accessories on and off, and has a hollow interior providing for maximum strength.
This 1/4"-20 to 1/4"-20 Ultra Arm Monitor Mount from Wooden Camera features a 3" extension connecting two double ball-joint clamps. A lever in the center of each clamp locks the joints on it, and the mounting points on the ends of the arm attach to your gear easily at the turn of integrated tightening knobs. Both ends feature rubber pads for more secure support.
The Ultra Arm system is interchangeable. Wooden Camera offers a variety of optional end-points that install into the ball sockets of the arm. These include NATO clamps, NATO rails, shoe mounts, super clamps, and even a Preston mounting bracket. Additionally, the system is compatible with many 3rd-party 25mm ball mount systems.
The 8" Safety Dovetail Plate from Wooden Camera is an ARRI standard dovetail with a stopper screw on one end and a safety latch on the other to prevent accidental camera detachment. It features threaded 1/4-20 and 3/8-16 holes for accessory mounting and tripod attachment. The dovetail can be attached to a shoulder pad for custom handheld configurations.
1/4"-20, 3/8"-16 Threads
ARRI Accessory Mounts
Manfrotto Locating Slots
Cold Shoe: x 1
|Rod Mount||15 mm: x 1|
|Lens Adapter Support||1/4"-20 Stud|
|Dimensions (HxWxD)||8.5 x 6 x 4.5" / 215.9 x 152.4 x 114.3 mm|
|Weight||15.6 oz / 442 g|
|Dimensions||5.5 x 4.5 x 1.5" / 140 x 114 x 38 mm|
|Weight||0.5 lb / 202 g|
|Rod Size||15 mm|
|Rod Length||12" (30.5 cm)|
|Top Mount||1/4"-20 Male|
|Bottom Mount||1/4"-20 Male|
|Points of Articulation||4|
|Maximum Length||9.5" / 24.1 cm|
|Weight||11.22 oz / 318 g|
|Dimensions||8.0 x 2.7 x 0.5" / 20.3 x 6.8 x 1.3 cm|
|Weight||0.6 lb / 0.3 kg|